News Studio LED Video Wall in Noida with Customize 1.25mm COB Curved Display
Transform Your Business With High-Quality Outdoor LED Display Boards, Indoor LED Video Walls, Advertising LED Screens, Digital Display Boards, And Customized LED Display Solutions.
Technology & Engineering Highlights
Custom Curved LED Engineering
The main 1.25mm COB video wall was configured in a custom curved format using standard LED cabinets, allowing the required studio geometry to be achieved curved cabinets.
1.25mm COB Main
Display
The main news studio backdrop uses a 1.25mm COB LED configuration across a 9112.5 mm × 2400 mm display area for
a fine-pitch studio
installation.
Integrated Studio Display Setup
The project combined a 1.25mm COB main wall, 2.5mm SMD ticker display, 1.8mm COB table display and a 75-inch digital signage screen within one studio
environment.
Project-Specific
Execution
The installation planned around the studio’s curved display and multiple display formats, with cabinet arrangement adapted to the project rather than using a standard flat-wall
configuration.
Project Snapshot
| Project Detail | Specification |
|---|---|
| Project | IGR News Channel Project |
| Location | Noida, Uttar Pradesh |
| Industry / Application | News / Broadcast Studio |
| Main Solution | Curved News Studio LED Video Wall |
| Main Display Technology | COB LED |
| Main Pixel Pitch | 1.25 mm |
| Main Screen Size | 9112.5 mm W × 2400 mm H |
| Screen Geometry | Curved |
| Cabinet Configuration | Faceted Curvature Using Standard LED Cabinets |
| Ticker LED Display | 2.5mm SMD |
| Table LED Display | 1.8mm COB |
| Additional Display | 75-Inch Digital Signage |
| Project Type | Multi-Display Studio Installation |
Project Requirement
The project required a coordinated display environment for a news studio in Noida rather than a conventional single-screen installation.
At the centre of the requirement was a large Fine-Pitch LED Video Wall that needed to follow a curved studio design.
The main display needed to combine:
a large-format visual surface
fine-pitch LED technology
a curved screen profile
integration with the studio environment
The project also required several supporting display formats.
These included a ticker LED display for the studio, an LED display incorporated into the table area and a separate 75-inch digital signage display.
The requirement therefore involved selecting and configuring different display technologies for different functions within the same broadcast environment.
The Infonics Solution
Infonics developed a Custom Faceted Curved LED Video Wall Using Standard LED Cabinets. Instead of depending completely on cabinets manufactured with a physical curve, multiple standard cabinets were positioned across controlled angles.
Together, these cabinet sections created the overall curved profile required for the news studio. This type of configuration can technically be described as a: Faceted Curved LED Wall or Segmented Curved LED Display Configuration. In a faceted configuration, individual sections remain flat, but controlled angle changes between sections allow the complete display to visually and structurally follow a curved form.
For the primary studio backdrop, Infonics used a 1.25mm COB LED Display measuring:
9112.5 mm W × 2400 mm H
The complete project also included:
2.5mm SMD Ticker LED Display
1.8mm COB Table LED Display
75-Inch Digital Signage Display
Rather than applying one display technology throughout the studio, different configurations were used according to the requirements of each visual area.
The Challenge
The most distinctive technical requirement was the geometry of the main LED wall.
The screen measured 9112.5 mm Wide × 2400 mm High and used 1.25mm COB LED Technology.
The studio design required a curved visual profile.
One option for creating this type of installation is to use specialised curved LED cabinets. However, the alternative solutions being considered for this project were based on dedicated curved cabinet configurations, which affected the overall commercial proposal.
Infonics approached the requirement differently.
The objective was to determine whether the required curved profile could be achieved using Standard LED Cabinets Positioned At Carefully Planned Angles.
This meant that the project was not simply about selecting a suitable LED module.
The physical cabinet arrangement, screen geometry and mechanical alignment all became part of the solution.
Cost was also an important consideration.
Based on the project information available, the final Infonics solution was delivered at a cost Under 30% Lower Than The Alternative Curved-Display Solutions Being Considered For The Project.
Why This Solution Was Suitable
The solution was developed around two important project considerations:
Screen Geometry and Commercial Feasibility.
A conventional flat LED video wall would not have matched the required studio design.
At the same time, the project did not necessarily need to depend entirely on specialised curved LED cabinets to achieve the required visual profile.
By positioning standard LED cabinets at controlled angles, Infonics was able to create a customised curved form around the project requirement.
The main screen used a 1.25mm COB Configuration, while other parts of the studio used separate technologies:
2.5mm SMD for the ticker display
1.8mm COB for the table LED display
75-Inch Digital Signage for an additional display requirement
This allowed the display architecture to be planned according to the purpose of each studio area rather than forcing one product type into every application.
Installation And Execution
The main studio wall required a customised cabinet arrangement because the curved form was being created using standard LED cabinets.
Instead of placing all cabinets along a single flat plane, the sections were positioned to form a Faceted Curved Profile across the complete width of the screen.
This enabled the 9112.5 mm-Wide LED Wall to follow the required studio geometry.
The main curved display was installed as part of a wider multi-display setup that included:
The studio ticker LED
The table LED display
The 75-inch digital signage display
This meant the project involved coordination between multiple display formats rather than the installation of a standalone LED wall.
Project Outcome
The completed project provided the Noida news studio with a large-format fine-pitch curved LED wall together with supporting displays for different areas of the studio.
The most important technical outcome was the successful creation of the curved main screen using Standard LED Cabinets Instead Of Relying Entirely On Dedicated Curved Cabinet Hardware.
The Main Display Combined:
1.25mm COB LED Technology
9112.5 mm × 2400 mm Screen Dimensions
Custom Curved Geometry
Standard LED Cabinet Construction
The Supporting Studio Solution Included:
2.5mm SMD Ticker LED Display
1.8mm COB table LED display
75-Inch Digital Signage Display
According to the supplied project information, the custom approach also enabled the project to be completed at a cost Under 30% Lower Than The Alternative Curved-Display Solutions Being Considered.
The project demonstrates how a broadcast LED solution can be engineered around the actual studio requirement rather than being limited to an off-the-shelf screen configuration.
Technology and Solution Highlights
News Studio LED Video Wall Installation In Noida
1.25mm COB Main LED Display
Main Screen Size Of 9112.5 mm × 2400 mm
Custom Curved Studio Backdrop
Faceted Curvature Created Using Standard LED Cabinets
Controlled Cabinet Positioning Used To Form The Screen Profile
2.5mm SMD Ticker LED Display
1.8mm COB Table LED Display
75-Inch Digital Signage Display
Multiple Display Technologies Integrated Within One Studio Project
Project-Specific Screen Geometry
Alternative To Relying Entirely On Specialised Curved Cabinets
Applications for Similar Projects
A similar fine-pitch or customised LED solution may be considered for projects where the visual environment requires more than a standard flat LED wall.
Potential applications include:
Television News Studios
Broadcast Studios
Newsroom Sets
Corporate Broadcast Studios
Podcast And Content Studios
Media Production Facilities
Presentation Studios
Command Centres
Control Rooms
Experience Centres
Conference Environments
Custom Architectural LED Installations
The Appropriate pixel pitch, screen dimensions, display technology and cabinet configuration should be selected according to the specific requirements of each project.
Why Choose Infonics for Similar LED Display Projects?
Projects such as this demonstrate why LED display selection should involve more than choosing a product from a catalogue.
The IGR project required:
A Fine-Pitch Main Display
Large Screen Dimensions
Custom Curved Geometry
Multiple LED Technologies
A Ticker LED Display
An Integrated Table Display
Digital Signage
Consideration Of Project Cost
Infonics developed the configuration around those requirements, including a custom method of forming the main curved LED wall using standard cabinets.
Infonics Technologies has over 20 years of experience in LED display and visual communication solutions and operates offices and manufacturing facilities in Noida, Uttar Pradesh and Bhiwandi, Mumbai. These capabilities support customised LED display projects that require product selection, technical configuration and project-specific solutions.
For another project, the final LED configuration should be determined only after considering the application, required dimensions, viewing conditions, screen geometry and installation environment.
Planning A News Studio Or Custom LED Video Wall Project?
Planning a News Studio LED Video Wall In Noida, fine-pitch display, curved LED wall or another customised indoor LED installation?
Speak with the Infonics Technologies team about your application, approximate screen dimensions, required geometry, viewing requirements and installation environment.
The appropriate pixel pitch, display technology and cabinet configuration can then be evaluated according to the actual requirements of your project.
Best Price Guarantee
Technical Support
Quick Installation
Frequently Asked Questions
The right LED video wall depends on screen dimensions, viewing requirements, studio layout, camera setup and intended application. For this news studio project in Noida, a 1.25mm COB display was used for the main wall.
The main screen used a 1.25mm COB LED configuration.
The main screen measured 9112.5 mm wide × 2400 mm high.
Depending on the required geometry and cabinet system, standard LED cabinets can be positioned at controlled angles to create a faceted curved profile. That approach was used for this project.
A faceted curved LED wall consists of multiple flat LED cabinet sections positioned at different angles. Together, these sections form a curved or polygonal screen profile.
The project also included a 2.5mm SMD ticker LED display, 1.8mm COB table LED display and 75-inch digital signage display.